GEO TEXTILE
Gotche Middle East supplies value-engineered, sustainable geosynthetic and landscaping solutions that support the creation of green, economical urban spaces. Our geo textile portfolio spans porous paving systems, geocells, geocomposites, and nonwoven geotextiles, the materials that stabilise ground, control erosion, manage water, and extend the design life of what is built above them. Through our various principals, we trade geotextiles and geosynthetics alongside commodity and specialty chemicals, giving contractors a single accountable source across the materials a project actually needs.
Ground is the one variable a project cannot choose. A designer selects the structure, the finishes, and the loading, but the soil is simply whatever is there and it is frequently weaker, wetter, or more variable than the design would prefer. Historically, the answer was excavation and replacement: dig out the poor material, import better, and carry the cost.
Geosynthetics changed that calculation. By introducing engineered materials that separate, filter, reinforce, drain, or confine, they let a project work with the ground it has rather than against it. The result is usually less excavation, less imported aggregate, fewer vehicle movements, and a longer service life which is why these materials have moved from specialist intervention to routine specification across roads, car parks, working platforms, landscaping, and drainage.
Separation and reinforcement cut dig-and- replace volumes on soft subgrades
Confibenment spreads wheel loads and controls rutting and different settlement.
Confibenment spreads wheel loads and controls rutting and different settlement.
Interlocaking cellular grids that carry vehicle loads while keepinig the surface permeable. Fill with topsoil and grass for a green finish, or with gravel for overflow parking, access roads and emergency routes.
A single-layer composite that bonds a high-modulus reinforcement grid to a nonwoven filter fabric. One roll delivers reinforcement, separation and filtration — halving installation time on soft ground.
Three-dimensional honeycomb confinement panels that lock infill in place. Lateral confinement converts loose granular material into a semi-rigid mattress that distributes load across weak subgrades.
Needle-punched nonwoven and woven geotextiles for separation, filtration and drainage. The workhorse layer that keeps expensive aggregate out of soft subgrade and lets pore water escape.
A rail-specific filtration and separation system engineered to replace traditional sand blankets. Hydrotex™ retains fine subgrade particles while allowing free drainage under dynamic track loading.
Geosynthetics are one of the highest-leverage sustainability decisions available to a civil engineer. Small quantities of engineered polymer replace large volumes of quarried, hauled and compacted stone.
Fewer truck movements and less cement-bound material per kilometre built.
Stabilise in place instead of digging out and replacing weak soils.serve
Thinner granular layers and reuse of marginal local fill.
Permeable surfaces, filtration layers and controlled infiltration.
Quieter, cleaner sites with smaller earthworks footprints.
Polymers engineered for a century of buried performance.
To provide our client with competitive prices, quality materials and good services. Provide a rewarding work environment for our employees.
Best services by their team
NO Compromise over Quality
Wonderful
Best services by their team
NO Compromise over Quality
Wonderful
Best services by their team
NO Compromise over Quality
Wonderful
Best services by their team
NO Compromise over Quality
Wonderful
To provide our client with competitive prices, quality materials and good services.
We supply geosynthetic solutions including HDPE geocells, Bodpave™ 85 and Bodpave™ 40 porous paving systems, Bodgrid™ geocomposite, standard nonwoven geotextiles, and Hydrotex™ fine soil geocomposite.
They are a three-dimensional cellular confinement system that improves soil stabilisation, controls erosion, and increases load support by confining granular infill so it cannot spread laterally under load.
Both are interlocking porous plastic paving systems for grass and ground reinforcement. Bodpave™ 85 can be installed with either a grass or gravel-filled surface. Bodpave™ 40 is a newer system in the same family designed for grass and ground reinforcement applications.
It is a geocomposite layer used with porous paving systems to reduce installation time, combining functions that would otherwise require separate layers.
Nonwoven geotextiles enhance the performance and design life of granular layers by providing filtration and separation, preventing sub-base aggregate and underlying soil from intermixing while allowing water through.
Hydrotex™ is a fine soil geocomposite acting as a filter and separator to ensure trackbed stability, removing the need for a sand blanket.
No. We supply geotextiles and geosynthetics through our various principals as part of our trading business.
Yes. Geosynthetics sit within our construction chemicals category alongside waterproofing chemicals, crack injection chemicals, polystyrene board, and polythene sheet.
We provide third-party engineering services including waterproofing and structural repairing, covering dry and wet crack injection and low cover coatings, alongside our material supply.
Email ask@gotcheme.com or call +971 56 5058564 describing the application, ground conditions, and loading, and our team will advise on a suitable specification.
Whether you need waterproofing on a new structure, remedial injection on an existing one, or a waste management system for plastic, chemical, and metal streams, tell us what you are dealing with and we will give you a straight assessment.